Cat flaps let your cat flap step go inside and out at their own pace, without having to let them in or out. They also can help to keep your cat from having to go to the bathroom inside the house.

It is easier to install the cat flap on a Upvc panel than a glass one, but you will require some knowledge and correct tools.

Take a look at the Door

Fitting a cat flap in the door isn't easy but as long as you select the right kind of cat flap make sure you take your time and follow the directions provided, it shouldn't be too difficult. We will demonstrate how to draw the shape using an jigsaw to cut out the door's area. Then we'll complete the job by affixing the flap. This will ensure that the flap remains in place and shields the door from rain and wind causing damage.

To determine the size of the cat flap you require, measure your pet's width. This will ensure that the flap is big enough to let your pet leave and enter the home without needing to open and close the door every time, but it is also small enough to keep them from moving too far in either direction.

Once you have the measurements, you can mark where on the door the template should be placed. typically this is done using an X. However, some kits include a drawing that shows where to drill. If you have one, then attach it to the door and use a pencil to draw around it. If your door has a sill or moulding along the bottom of it ensure you have clearance from these to ensure your cat's safety and will prevent them from getting access to your home.

Next put on your eye protection and a dust mask, and using a jigsaw start cutting according to the lines you penciled in, but don't push the blade too hard as this will cause it to cut more quickly than you'd like it to. Use a set square to ensure that you are cutting the material in a proper manner and that the cut is a rectangle shape. When you are satisfied with the result, you can take out the rest of the door material.

Draw a Line

The cat flap is a great method to let your pet in and out without having to worry about them coming in with a visitor, or leaving unwanted gifts inside the house. It also stops draughts and helps to keep the temperature inside your home stable. Fitting a cat flap to your door can be a daunting task to those who haven't done it before. Many people will call a professional carpenter or joiner to do the work. This is a viable option, however you can do it yourself if your tools are right and the steps are adhered to.

It is much easier to accomplish on doors made of wood, however it is possible with uPVC. However you should be cautious not to scratch the doors as this could invalidate your guarantee. The first step is to measure the door and ensure that it can be able to accommodate the new cat flap. This isn't too difficult for an ordinary uPVC door, however you may require more care if you have an insulated or composite type of door as these are more difficult to cut into than solid uPVC panels.

Next, you will need to determine the height of your belly for your cat. This is the height from the floor to the bottom of the cat's stomach, and you'll need to locate a place on the door where this measurement will fall within the range that your cat can comfortably pass through. Once you have this information, you will have to draw the area with an eraser and a spirit level so that you can be certain that the hole you will make will be a good fit for your cat.

After you've marked the area, it's now time to cut the hole. It is essential to take your time and use a jigsaw in order to ensure the cuts are smooth and clean not uneven and rough. This could damage your door. Wear safety glasses and a dust mask while using a Jigsaw. Inhaling sawdust is dangerous for your health. Once you have completed the cutting process, you will need to smooth out the edges of the hole using sandpaper, so that your cat flap can be fitted easily into place.

Make a hole

Installing a cat flap to an existing door panel or double glazing sealed unit can be difficult. It is tempting to tackle the task yourself, but unless have a lot of experience in DIY it is recommended to hire a professional in to do the task for you. A mistake could not only be ugly but also pose security risks. It could let cold air to enter when the cat is outside and hot air to escape when inside.

The hole's location should be marked on the door with the help of a pencil and a spirit level. This will ensure it is positioned correctly and aligns with the door's other parts. Make sure you have some sandpaper on hand to smooth out any rough edges.

Wear any safety gear you require when working with a power tool. If you are concerned about the sound of the jigsaw, consider buying a cordless version which is quieter and simpler to use.

It is best to only remove the material required to fit the flap. It is essential to leave a little extra material to make the wall thickness of the flap. However, removing too much can cause issues or even damage to the frame of the door.

If the upvc door features a metal panel or frame, it may interfere with the microchip flap. In this situation you'll need to make an oversize hole to ensure that the metal doesn't touch the wall of the flap.

If you're planning to install a cat flap fitting flap into a upvc or double-glazed window with metal frames you'll need to talk to a specialist. They will offer you a brand new piece of glass that has the hole that is already designed for the cat flap. It will be much cheaper to get this done rather than to attempt to fix the cat flap onto an existing glass pane that was not designed specifically for the purpose.

Place the Flap

cat flap cover for winter flaps allow your pet the freedom to go and come whenever they like and let them relax in the home whenever they want to. If you have an uPVC front door, it might be difficult to put in a cat flap fitting flap. This is especially the case if you do not own an glass panel that can be cut. Luckily, if you're happy to buy and install a half-glazed replacement uPVC panel then it is possible to add the cat flap to the doors. It's not just a matter of slicing a hole into the door. It is also necessary to do a few things to ensure that the door is secure.

A composite, uPVC, or GRP door panel typically comprises an extremely thin plastic outer skin bonded to a soft insulating polystyrene core. The material is fairly fragile and care should be taken when cutting into it to avoid damaging. This kind of door typically has a template that you can use as a reference to cut the hole into your door.

Once you have marked the position of the hole in your door, it's time to install the flap itself. You can choose from a wide range of designs, from simple push-button models to ones that are microchip-activated and only let your pet in. Whatever kind of cat flaps you select it is essential that your cat flap in upvc door panel (qooh.Me) is able to use the flap comfortably without getting caught in the rain.

It's a good idea select circular fittings rather than a square one, as circles can be more securely cut into the door glass. This is because square holes can make glass more vulnerable to cracking when drilling is applied to it. It's also a safer choice to use since you're not putting yourself at risk by drilling into toughened glass that might break and injure your pet or your family. This is particularly important if you have a young or elderly person at home who could be injured by shards glass.