French Door Window Replacement

french door repair service doors are a stunning design element for homes. They also provide an amazing view. French doors are also a popular choice to increase the efficiency of your home's energy use.

If one or more of your french door lock replacement door windows are damaged it could be time to replace french door them. It is simple to replace the glass on French door windows.

Replacement Panes

French doors provide an elegant, timeless appearance to homes. French doors are often glazed to let sunlight and views from outside enter the home and brighten interiors. Glass panes with a glaze pose a security threat if they crack or break. Fortunately, replacing a damaged or cracked window pane won't need the purchase of an entire door and can be completed by using a few tools elbow grease and some basic knowledge of working with glass.

French door replacement panes can be found in many styles and materials. They can be transparent, colored or made of safety glass to provide impact protection. They can also be made to be etched or patterned to provide an element of privacy or design to the windows. In addition, they can be insulated with low-E films or even argon gas to boost energy efficiency and reduce glare and UV radiation.

To replace a broken window pane, take out the broken glass first from the frame. Be sure to wear gloves and goggles during this procedure to avoid injury. After getting rid of the old glass the frame should be cleaned to remove dust or debris. To clean the frame it's a good idea to scrape the edges of the frames and then remove any glazing points.

After the frame is cleaned and the glass is ready to be inserted into place and secured. To avoid leaks, misalignment and other problems it is crucial that the glass is aligned exactly to your existing frame. Typically, the new glass is fixed with double-sided tape or caulk. Once the putty is dry it can be painted or covered with trim to finish the job.

The seals that are placed between the seals on your French doors may become damaged over time, allowing moisture to seep in and cause an unnatural appearance or loss of insulation. This is typically caused by age and can be addressed by having a professional replace or repair the seals on the existing glass units that are insulated (IGUs). However, it's possible to replace a window pane on the French door with a new insulated glass unit, providing you have the correct measurements for the new piece of glass.

Frames

The frame holds the glass and supports the door as it is able to swing up and down. The frames for french doors could be metal, wood composite, or vinyl. They can be painted or stained. Frames made of wood are usually stained and then finished with a top coat of clear varnish to protect them against the elements. The other frames can be left as natural or painted in a color that you prefer. A lot of our customers choose to keep their existing frames and replace the broken glass. This will give you a fresh new look at a fraction the cost to replace french doors of replacing the entire door system.

It is advised that if you wish to stain the doors, you do so in a space with adequate ventilation and follow the precautions, warnings, and recommendations of the paint's manufacturer. Sand the surfaces that will be stained lightly. Clean with mild detergent and allow to dry. Once the surfaces are dry they can be coated with an opaque acrylic base coat, and allow to dry completely between coats. A clear top coat is applied following the paint manufacturer's recommendation.

It is essential to choose the right glass for your french doors, for both safety and performance. Glass should be temperable. This is more secure in the case of a break than regular annealed. Tempered glass also does a better job of controlling the heat and reducing the glare inside your home. It is more likely to not develop condensation between the two layers of glass.

The glass inserts inside your French doors could be a single piece that fills the entire door (1 lite) or they may have a grid on the bottom, referred to as a divided lite. Divided lites have a classic look that is elegant and works well with a variety of architectural styles.

It is important to replace the glass of your French doors with an entirely new glass that has the exact same thickness as the old. This will ensure proper operation and a tight seal. Insulated glass windows are typically 1/2" thick, however decorative "triple glass" glass (two clear pieces joined by a third piece of decorative glass between them, typically with metal caming inlaid) can be up to 3/4" thick. When replacing a window it is crucial to choose the correct thickness of glass. Windows that are too thin may not be sealed properly or become difficult to open.

Hardware

Some French doors feature glass that cover the entire door (1 lite) or some have a top and regular pane on the bottom (1/2 lite). If the glass of the door window is broken it must be replaced.

There are several things to consider when replacing a French-door window. The first is determining the type of glass that is required. Safety glass is available and can help protect against intruders, reduce glare and control UV (ultraviolet) radiation. It is also more durable than regular glass that is annealed and won't shatter into sharp, jagged pieces.

The second thing to consider is the hardware that will be used. It is crucial to select the right hardware to match the style of the window and door. It should be easy to operate and built to last for years of usage.

After the glass replacement is installed there will be a few finishing touches that need to be done. The trim around the glass needs to be removed and the nails cut. This is best done by hand or with a hacksaw. The trim can then be re-attached, and the nail holes plugged with caulking or putty.

Installation

French door windows provide a natural connection between indoor and outdoor spaces. They can be installed with just one pane of glass or a multi-pane design, these windows offer beauty and style to any residence. In certain cases, they could require replacement or repair to function properly. It can be a daunting project for homeowners to replace French doors and Windows however, with careful planning it's possible. The best results can be obtained by selecting the best products and following the right steps.

Before starting the replacement process, it is important to clear the space around the window. It is also a great idea to cover the walls and floor with protective coverings. Once the area is cleared, take out all hardware and glazing points. Use a prybar and utility knife to unwind and remove the trim and sash. Once the old window has been removed, vacuum and sweep the area to remove any leftovers.

Once the new window has been installed, add insulation to help in energy efficiency and comfort. This step is particularly important if the old windows were double-paned and had moisture between the panes. This moisture could damage the glass and create a milky film appearing on the interior of the window.

Fiberglass is the best insulation for these areas. It can be used to regulate both temperature and sound. It can be purchased at many hardware stores and is very easy to install.

Installing insulation is as simple as cutting a piece insulation to the appropriate size and then applying the drywall tape along the seams. Next, mud all the seams. Let them dry, then sand the surface until it is smooth. Paint the exterior window trim and the sash casing to match your home.

After the sash has been closed, replace the parting stop on top and the wood interior stops on the sides and bottom of the frame. Attach them using a the 4d nail. Then, slide the sash down to within 10 in. of the window sill. Make use of the sash lifts with a screwdriver, by sliding it into the groove of the stopper, and then twisting slightly from horizontal to vertical.