Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy from theft by using the ghost 2 immobiliser cost Immobiliser. This system is discreet & does not require any additional key fobs to operate.

The device makes use of the buttons on your vehicle (steering wheel, door panels & centre console) to create a unique changeable pin code sequence of up to 20 presses. This will allow your vehicle to start.

Simple change of PIN code

Many owners are upgrading their security because of the rise in vehicle theft. There are many types of security products that are available from tracking systems to immobilisers and alarms. Not all of them are equally effective in protecting your vehicle. A tracking system may help you locate your car if it is stolen, but it will not stop the crime. An immobiliser, on the contrary does exactly what it says on the tin: it shuts down the engine of your car so that it cannot be started. The Autowatch Ghost is one of the most advanced options available, making it almost impossible for thieves to steal your car.

The ghost Immobiliser problems device uses the buttons on your car to generate an unique sequence that needs to be entered to allow the engine to begin. This can be done using the indicator stalk or window buttons. In addition to this it is possible to use an app for mobile devices that acts as an emergency PIN code override and allows the driver to operate the car without using the button sequence. This is especially beneficial if you have to give your car away for valet parking or servicing since the immobiliser will remain activated and not disabled.

The Ghost is a unique and innovative device that works in conjunction with buttons on your vehicle rather than as a separate device. This means that it's not only a highly effective deterrent against vehicle theft but can also be transferred onto any other vehicles you own, making it more of an investment than a traditional steering wheel lock.

Weatherproof tiny device

The Autowatch ghost immobiliser price immobiliser is a high-tech security device that protects your pride and joy against key cloning, hacking & ECU swapping. It's a weatherproof, tiny device that connects directly to your vehicle's ECU via the CAN data bus to shut down the engine. It can be fitted into the vehicle without wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices, which are a common method used by car thieves to get around immobilisers.

The benefit of using CAN data is that it operates in a silent manner when compared to conventional systems. It isn't detected by sophisticated RF scanning and code-grabbing technologies and cannot be recognized by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators, but instead uses buttons in your vehicle, such as the steering wheel, centre console or doors, to create an unique sequence of disarming. The sequence can be extended to up to 20 presses to provide additional security. The iPhone app lets you make a single, authorised connection using a pairing code that is unique to the Ghost and the communication between the two devices is encrypted.

The Ghost also prevents car thieves from adding an additional key or replacing the ECU to bypass the immobiliser and begin the engine. It will only allow the engine to start only if the correct pin code is entered. It can also be put in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) so that you can give your car to a valet service or to be serviced without needing to enter a PIN.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device intercepts signals to stop your car from starting up normally until you enter a specific code. The system can be activated or deactivated using your own smartphone application without the need for additional wires.

The standard factory immobilisers work by using a transponder that is integrated into the key. This sends a message to the ECU. The car will start when the correct code is sent. However, if a transponder from another vehicle is used instead, the immobiliser won't recognise it. This makes it possible for the vehicle to be started and stolen. The Ghost immobiliser was created by an South African company at the top of security systems for vehicles technology. It safeguards your vehicle from key cloning, hacking and even key theft. The only way that a burglar could take your car is physically towing it away, and even then they wouldn't be able to drive it.

Ghost makes use of buttons on your vehicle, including the indicator stalk, the steering wheel, as well as the door panels, to generate unique PIN codes which must be entered to use your car. This is not required to use additional hardware like a key-fob and can be as long as 20 presses long. It is also unrecognizable by diagnostic equipment and does transmit radio frequency signals, meaning thieves are not able to use sophisticated RF scanners or code-grabbing techniques to determine if the system has been set up.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks Ghost is covertly integrated into the vehicle so it can't be taken away or disabled by thieves. It's also harder to remove than a car alarm, which requires disarming via an action sequence. This makes it a fantastic alternative to a GPS tracking device, which can be used to locate your vehicle after it's been stolen.

Emergency PIN code override

You don't need to look far on social media to find stories or even videos of vehicles that have been taken by car thieves employing the latest technology tools available to them. This includes key-cloning devices and hacking tools that allow thieves to start the vehicle with the original keys.

The Ghost immobiliser ghost helps combat this and provides you with an additional layer of protection to stop your vehicle from being stolen in the event of being targeted by thieves. It creates an individual pin code by pressing the buttons on your steering wheel, door panel, and on the centre console. The unique pin code is entered in conjunction with the original key fob to stop the engine from beginning. The unique override pin is found on a black plastic card which you will receive following your installation. It is simple to remember since there aren't any LED indicators.

The device is hidden inside the vehicle's wires, and doesn't emit any radio signals, so it can't be identified by modern criminals using diagnostic software that can recognise what type of security system you have installed. This makes it an excellent alternative to the tracking device.

Contrary to other security systems which use a relay in engine bays, immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable a vehicle completely by sending a digital block to the ECU and engine.

They can also be connected to a separate alarm immobiliser or tracker. This must be specified prior to the installation. They also work with service/valet modes and is a great alternative to a tracking device when you bring your vehicle to the dealer for repairs to an electrical problem.

Service/Valet mode

In recent years there has been an increase in vehicles being stolen with the owners' keys. It's easier than ever to steal your pride & joy thanks to the availability of key cloning tools and door lock picks. We have developed the Autowatch Ghost Immobiliser to combat this. It prevents your car from being driven, even if you keys have been copied.

It communicates directly with your car's ECU (Engine Control Unit) through the data loop of CAN. It's completely quiet since it doesn't use radio frequency or a key fob. It isn't detected by diagnostics or any other hacking device. It also shields against the possibility of adding an additional key or replacing the ECU to bypass the system since only the correct PIN code can allow the engine to start.

The device is hidden in your vehicle and is accessible via buttons on your steering wheel, the centre console, and door panels. A unique and changeable PIN code sequence that can be as long as 20 digits needs to be entered prior to being able to start your vehicle.

This is the first aftermarket CAN-bus immobiliser that was developed. It will prevent your vehicle from being driven or even started when you don't enter a PIN code before entering. If you're driving away with the device armed it will display an indicator on your dashboard which will flash continuously for about 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to function as normal. If you do not enter your PIN at this time the indication will keep flashing & will require a new PIN code for every attempt to start your car.