How to replace lock on patio door a UPVC Door Replacement Lock

If the lock on your door is jammed or doesn't work in the way it should, you might need to replace it. The process might seem complicated but it's actually easy and doesn't require the help of an expert locksmith.

Few basic tools, some patience and a lot of love is all you need. Here's how:

Measure the Door

If you're having difficulty locking your uPVC door, or it won't close and lock, it's the time to replace it. If you've just moved into a brand new home, a tenant moved out without returning keys, or if your multipoint gearbox is showing signs wear and tear, changing the barrel on your lock to an alternative one will give you an extra layer security.

It is necessary to take measurements before buying a new lock. This will ensure that the new cylinder will fit correctly and not affect the security of your home. The backset is the most critical. This is the distance from the center of the keyhole bore hole to the edge of the door. It's usually 2 3/8 or even 2 3/4 inches. Take the length of the measurement using a measuring tape and note the measurements.

It is also important to know what the thickness of the faceplate is. This is the thickness of the part that covers the mechanism of the lock. If you can, get an alternate lock manufactured by the same manufacturer as they'll be made to the same measurements. If you can't find the name of the manufacturer or the mark, simply measure the width of the current cylinder. You can also verify this by placing a pencil on the keyhole and measuring from the end of the lock up to the centre of the pencil mark on each side of the cylinder.

Once you have the measurements you can begin the process of removing the old cylinder. Start by loosening the screw holding the handle in place using a Phillips-head driver. Then, loosen the screws holding the handles on the exterior and interior to each other. After you have removed these screws, you can remove the barrel screw on the exterior handle to remove the cylinder.

If the cylinder is stuck inside the lock, try WD-40 or another lubricant, to help you pull it out. It's important to not make it go out in a forceful way - forceful turns can damage the internal gearbox, which could cause additional issues with the lock. Consider upgrading to a lock that has anti-snap, anti-bump and anti-snap protection. This will make it more resistant to attacks by thieves.

Source the Lock

When buying the latest door lock, you should consider some factors. To ensure the quality and fit make sure you purchase the right size cylinder and from a trusted manufacturer. You'll also require a few basic tools to do the job, including a screwdriver, tape measure and rubber mallet.

There are several signs your lock made of upvc is worn out and must be replaced. Typical problems include visible damage to the lock or a handle that's loose and not fitting correctly. If the lock begins to jam or isn't locking at all it's time to think about a replacement.

The correct installation of the lock is important once you've chosen the correct one. This will ensure that it locks and works correctly. Follow the manufacturer's directions when installing the multipoint lock mechanism inside the upvc panel. Attach the proper faceplates, handles and other parts. Test the mechanism by locking the door and unlocking it from both the inside and outside. If everything looks good, it's time to celebrate your achievement.

The process of replacing a door lock made of upvc may seem daunting but it's actually an easy DIY project and is done without the need of needing a locksmith. It's simple to change your lock if one is aware of the indicators and have the appropriate tools.

Keep in mind that just like any other moving part the door lock made of upvc could benefit from lubrication to run smoothly. A few sprays of silicone or a graphite powder lubricant will aid in prolonging their life by ensuring they are free of excessive friction that could wear them down prematurely. Regularly cleaning your door's lock mechanisms with WD-40 as well as a damp cloth is a good way to keep them in great condition.

Take out the Cylinder

It is possible to change the lock barrel If you're having issues with your door made of upvc. This is a straightforward DIY project that can be completed in just a few moments and is a great way to keep your home secure. This process requires that you identify the manufacturer of the lock and then search for the appropriate replacement.

A door lock that is broken could be a huge hassle, and it can also create a serious security risk. It's not uncommon for locks on uPVC doors to experience issues and it's crucial to maintain regular maintenance. Experts recommend that you change your lock every seven years. If your lock is seriously damaged or you are not satisfied with its performance, expert assistance may be worth considering.

In most cases, a pin-based system known as a euro cylinder is utilized for uPVC doors. They are easy to use and seldom break down, but can be vulnerable. It's therefore worth replacing upvc door lock and handle your lock with a modern lock that comes with anti-snap, anti-bump and anti-snap security to guard against burglaries.

The first step in changing your uPVC locks is to remove the handle. This will expose the old cylinder. This can be difficult because there are often some screws hidden underneath the handles, so make sure you have a screwdriver in your bag. The next step is to experiment with gently moving the cylinder until it starts to loosen. Once it loosens then you can pull it out of its socket.

After you've found a suitable replacement, it's the matter of screwing it in place and then reverse the removal procedure. You should not overtighten the lock, as this could cause the cylinder inside the door to get stuck and stop working as it should. Test the uPVC replacement lock by opening and closing it from the inside and outside. You should now be able to lock and unlock the door using your key. If not, make sure the screws are tightened and try again.

Install the Lock

You'll need to conduct some research first to ensure that the lock you choose is suitable for your door. You'll be required to know your backset and faceplate dimensions - the distance between edge of the front door lock replacement cost door and the center of the handle/cylinder - along with the type of lock you want to ensure that the new lock fits correctly without compromising security.

After you've completed this, it's now time to install the new lock. You should ideally open the door with a prop, or secure it so that it does not close during the installation process. First, loosen the screws that hold the handle in place by using a Phillips-head screwdriver. Once the screws are removed then you can slide the inner handle and the outer handle away.

You can now begin to take off the old cylinder. This is something you'll be able to do by taking it from its barrel. Once you've removed your cylinder then you'll be able to install the new lock, ensuring that you follow the guidelines for your specific model. Once the lock is installed, you can test it by opening and closing the door from both the inside and the outside, and locking and unlocking it from the interior, and then testing it again.

There are a variety of reasons to consider to change the locks on your uPVC door. You may have just moved in, and not had a key. The previous tenant may not have returned the key. You may also prefer to upgrade your lock to something more secure. It shouldn't take more than five minutes to replace the lock cylinder.

No matter if your uPVC doors are equipped with single-point or multipoint locks they all share the same basic mechanism. This means they can be susceptible to issues at times like not being able to close or becoming stuck. These issues are caused by weather conditions, wear and tear, or just the normal use. Fortunately, the majority of these problems can be solved with some minor maintenance or the assistance of locksmith.