Sliding Patio Doors Repairs

Your sliding patio door repair company doors will let the outdoors in to your home and improve the efficiency of your home's energy usage. Over time, they may start to show signs that need some attention.

Luckily, most of the issues with sliding patio doors are fairly simple to address. Find out how you can keep your sliding patio door repairs near me doors looking and functioning like new.

Tracks that are dirty or damaged

One of the most frequent causes of sliding patio sliding door repair doors that do not open is clogged or dirty tracks. Over time, the dirt and grime of daily use can build up on the track. This can cause the jam to break or even break completely.

The buildup can be slowed by incorporating regular light cleaning of tracks and sliding doors in your daily household chores. Start by cleaning any large debris from the tracks and then wipe them clean using warm water and a non-abrasive cleaner like dish soap. Vinegar can be added to your cleaning solution to remove stubborn dirt and grease stains.

If your sliding door still not moving smoothly after you've completed these steps, it could be a sign that there is a more significant damage. This could require a professional to repair or replace the door. There are a few simple fixes you can do before calling a professional to avoid costly repairs or replacements.

It is important to put a doormat at the bottom of your sliding doors in order to catch dirt before it has the chance to reach the tracks. Make sure to trim the plants and shrubs that are located near your sliding door to limit the amount of debris tracked into the tracks. Close the door properly to prevent damage to the rollers and wheels. By keeping your doors clean and lubricated you will extend their life considerably.

Rollers that are not aligned

Occasionally it happens that a sliding patio door may become out of alignment or becomes stuck. Usually, this is due to dirt or other obstructions that can be easily removed. Sometimes it's due to bent track or a bent roller. In this situation you can re-align the rollers by removing them using the adjustment screws, and then cleaning with rubbing alcohol. Be cautious because these parts are delicate.

If your doors are still sticking, you can lubricate the rollers. This will reduce friction and allow them to slide more easily. It is recommended to apply a silicone-based lubricant as petroleum-based ones can draw dirt more quickly. It is essential to clean the rollers and tracks prior to lubricating.

Once you've cleaned the rollers, you are able to reinstall them with the adjustment screws. It's also a good idea to apply the same lubricant that you used when cleaning them. When you reinstall the rollers, be sure to push them all the way into their channels. You can then check your door to see whether it slides more effortlessly.

If the problem continues it could be necessary to take down your door and inspect the rollers and tracks for any more serious issues. If the tracks or wheels are badly bent, you may need to replace them. It's best to hire an expert to install the rollers or tracks in this situation.

Warped Glass

Sliding glass door are great to bring the outdoors into your home and letting in natural sunlight but they could also be vulnerable to damage that needs repair or replacement. Cracking, warping and fading are a few of the most common problems. Warping occurs when the components that make up your sliding glass patio door begin to degrade as a result of exposure to sun, heat and other environmental factors. The most common cause of cracking is injuries caused by impact, like from a lawn mower or ball run-in, whereas fading typically occurs due to repeated contact with sunlight or other natural elements.

If your sliding patio doors aren't easy to close or open it could be an indication that the tracks and rollers aren't working properly. This issue could be caused by accumulated dirt, rust or debris in the track, misaligned wheels or a lack of lubrication. Cleaning the rollers and tracks, removing obstructions and applying silicone spray can aid in resolving this issue.

The locking mechanism might also be defective, making it difficult to open and close your sliding patio doors. It could be caused by misalignment, wear and tear, or the combination of both. To fix this issue, simply adjust the locking mechanism by turning the adjustable screws located at the bottom.

Drafts or air leaks around your sliding patio door are a frequent problem that can reduce their energy efficiency. They usually result from damaged weather stripping and poor door alignment and can be easily corrected by replacing the old weather stripping and realigning the doors.

Loose Handle

It can be quite frustrating when the handle of the sliding door is loose. It can be difficult to open the door. This problem is caused by an incorrectly aligned lock mechanism. It can be fixed by loosing and tightening the screws holding it in the correct position.

Another reason for a loose handle is that it has separated from the spindle that connects it with the handles' exterior and interior. This is typically the result of a combination of factors, including excessive use or wear and tear or just general ageing. If the issue isn't dealt with quickly, the handle can become loose and fall off.

The best method to solve this issue is by first locating the screws that attach the handles' exterior and interior. They are typically hidden by tabs made of plastic that can be removed with a flathead screwdriver (or in the case of some handle styles, a Phillips-head screwdriver). Keep these screws in a safe place to avoid losing them.

Once the handles that were previously used have been removed, the next step is to take off the loose spindle. This can be done by tapping on the end with a mallet or hammer until it is free of its position within the door. Then, the new handle can be put in place by simply placing the spindle through the hole on the interior handle and then placing the other end of the spindle through the hole in the outside handle. After the handle is installed then tighten it by screwing back the screws. Then, test to make sure the lock and unlock mechanism works properly.

Poor weatherstripping

Weatherstripping that's damaged or cracked may allow water and air to get into your patio door, compromising your home's comfort and energy efficiency. In addition to allowing moisture, it can create drafts and also increase your cooling or heating costs. It is good news that replacing damaged weatherstripping is an easy repair patio door lock that doesn't require professional help. You can take off the old weatherstripping by loosing the staples with the help of a screwdriver or by gently squeezing it with a putty knife and taking it off the door. Then, you can wash the area and apply a fresh layer of weatherstripping. This is secured by a foam seal to stop leaks and improve the comfort.

If your sliding patio door isn't working as it should, you must to address the issue immediately to avoid further damage and ensure that they are functional for years to be. Depending on how serious the problem is, a DIY solution or a repair/replacement by a professional may be the best option.

The majority of sliding patio door issues are caused by dirty rollers, faulty tracks, and an untidy handle. These issues can be resolved through regular cleaning and maintenance including changing the track's lubricant and adjust and tightening the hardware. If these solutions are not working then you should seek advice from a professional to make sure that your patio is working just as it should. Check the warranty information before you decide to replace or repair your patio door. This will save you money in the future for repairs and replacements.